Skip to content

Prosthetics

Dental bridges

A fixed solution for the gap left by losing one or several consecutive teeth. The bridge rests on the neighbouring teeth or on implants and restores the function of the bite.

Dental bridges

Video · 0:15

How a dental bridge is fitted

A short animation shows the procedure: from the gap where a tooth is missing, through preparing the neighbouring teeth, to fitting the dental bridge.

How it works

How the procedure works

  1. 01

    Coming in for an examination

    The first step is a detailed examination, during which the state of the teeth, gums and bite is assessed and it is determined whether a dental bridge is the best solution. Where needed, an X-ray is taken to check the state of the roots and the bone around the teeth that will support the bridge. Based on the examination, the treatment plan, the look of the future work and the material to be used are agreed.

  2. 02

    Preparing the teeth

    The teeth that will carry the bridge are carefully prepared and shaped under local anaesthetic. This creates the space needed for the crowns that will form part of the bridge and ensures the future work fits precisely. If a tooth is weakened by a large filling, decay or earlier damage, it must be treated before the bridge is made. In some cases root canal treatment is carried out or a post and core is placed so the tooth is stable enough to carry the prosthetic work.

  3. 03

    Conventional impression or digital scan

    After the teeth are prepared, the shape of the prepared teeth, the surrounding gums and the relationship between the upper and lower jaw must be recorded precisely. This can be done with a classic impression in impression trays or with modern digital scanning. A conventional impression uses special trays and precise materials that faithfully transfer the detail of the teeth and gums. A digital scanner produces a three-dimensional representation of the teeth and bite, which is then used for digital planning and production of the bridge. Both methods allow precise, functional and individually adapted prosthetic work. After the impression or scan, a temporary bridge is fitted to protect the prepared teeth and keep the smile looking tidy while the permanent work is made.

  4. 04

    Trying in the bridge

    Once the bridge is made in the dental laboratory, a try-in follows, during which its shape, colour, position and contact with the neighbouring teeth are checked. Particular attention goes to the bite, so that the bridge is comfortable when chewing and speaking. The bridge can be made from zirconia ceramic, all-ceramic or metal-ceramic, depending on the area of the mouth, aesthetic requirements and the patient's functional needs. Where needed, minor corrections are made during the try-in so the final result is as natural and comfortable as possible.

  5. 05

    Temporary cementation

    After a successful try-in the bridge can be temporarily fixed with a special cement. This lets the patient get used to the new work over a few days and check comfort when chewing, speaking and in everyday wear. At this stage any minor adjustments can be made before the bridge is finally cemented.

  6. 06

    Permanent cementation

    When it is established that the bridge fits properly, that the bite is stable and that the patient is satisfied with the aesthetic result, the bridge is permanently cemented. That completes the treatment and restores full function to the replaced teeth. With regular oral hygiene, proper cleaning around the bridge and regular check-ups, a dental bridge can be a lasting, stable and naturally aesthetic solution.

What dental bridges are

Missing one or more teeth can affect chewing, speech, the look of the smile and how load is distributed among the remaining teeth. A dental bridge is a fixed prosthetic solution that fills the gap left by tooth loss and restores the function and appearance of the smile.

Every bridge is planned individually, according to the state of the teeth, gums, the bite and the desired aesthetic result. The aim is a stable, functional and naturally shaped restoration that fits harmoniously into the smile.

A dental bridge is fixed prosthetic work made up of several connected crowns. Part of the bridge replaces the missing tooth, while the crowns on either side rest on the neighbouring teeth or, where needed, on implants.

Bridges are most often made when one tooth or several consecutive teeth are missing. Before production, a detailed examination is needed to assess the state of the supporting teeth, gums and bite and to choose the material and shape that will best suit the patient.

Modern materials allow bridges that are strong, long-lasting and aesthetically very natural. Particular attention goes to the colour, shape and translucency of the teeth so that the prosthetic work blends in among the remaining teeth as well as possible and allows safe, comfortable chewing.

Common questions about this service

  • When is a bridge better than an implant?
    A bridge is a sensible solution when the neighbouring teeth are already weakened or have large fillings, so they need to be covered with a crown anyway. When the neighbouring teeth are healthy, an implant keeps them untouched.
  • How do you clean under a bridge?
    Alongside ordinary brushing, superfloss or interdental brushes are used. We show you how when the work is fitted.
  • How many teeth can one bridge replace?
    It depends on the number and condition of the supporting teeth and on the chewing load. That is assessed at the examination, with an X-ray of the roots and bone.

Have a question about this treatment?

Get in touch and book an examination. After the examination and the scan you will know exactly what is needed and how long it takes.